Stock Manifold Sub-Systems for Application Development

Stock Manifold Sub-Systems

The Lee Company offers stock manifolds. These are valuable aids to the designer during early
development work and initial prototyping.
Valve Type Manifold Part NumberNo. of ValvesManifold Description
LHD (Plug-In)LFMX0503800A1Individual Ports
LFMX0510413B3Individual Ports
LFMX0510418B8Individual Ports
LFMX0510423B3Common header, individual NC & NO
LFMX0510428B8Common header, individual NC & NO
LFMX0510433B3NC & NO header, individual commons
LFMX0510438B8NC & NO header, individual commons
LHD (Face Mount)LFMX0507200A1Individual Ports
LFMX0510513B3Individual Ports
LFMX0510518B8Individual Ports
LFMX0510523B3Common header, individual NC & NO
LFMX0510528B8Common header, individual NC & NO
LFMX0510533B3NC & NO header, individual commons
LFMX0510538B8NC & NO header, individual commons
LFA No standard manifolds available
LFR LSMX0501403B3Common header, individual NC & NO
LSMX0501405B5Common header, individual NC & NO
LFV (Threaded)LSMX0502450B1Single valve module
LFMX0514100B3Common header, individual outlets
LFMX0514200B 8Common header, individual outlets
LFV (Flange)LSMX0502400B1Single valve module
LSMX050237083Common header, individual outlets
LSMX0502390B5Common header, individual outlets
LFYLSMX0501500B1 Single valve manifold
LPVNo standard manifolds available
LPLNo standard manifolds available
Manifold Configuration
Manifolds can be produced by two basic manufacturing techniques in a variety of materials.
  1. Conventionally Machined: drilled and milled, available for all materials.
  2. Laminated: machined layers permanently bonded, primarily for acrylic and aluminum.

Materials
Many standard and exotic materials are available in the fabrication of the manifolds. These can
be selected to match the requirements of the individual application needs.
  • Acrylic
  • Polysulfone
  • Aluminum
  • PEEK
  • Stainless Steel
  • Titanium
    Design Services
    • Schematic to manifold conversion
    • Dynamically matched components and manifold designs
    • Different port styles
    • Space, size and weight optimization
    • Final testing and assembly to your protocols
    Fluidic Components
    In addition to the standard valves and pumps offered for manifold use, the EFS Group can
    incorporate a variety of additional components directly into the manifold design.
    • Restrictors (fixed and variable)
    • Filters and screens
    • Mixing and bubble trap chambers
    • Optical windows
    • Accumulators
    • Sensor wells

    In addition to Engineering and design services Lee offers state-of-the-art manufacturing facilities. Custom manifolds can incorporate:
    • System testing to specific application parameters at a subassembly level
    • Computerized testing and record keeping of the individual or lot results
    • Serialized test data
    For more information, please send us your application information via our ASK LEE service. Or contact our application engineers in the USA at 1-800-LEE-PLUG or our representatives around the world.
    Copyright 03/2004 by The Lee Company, USA
    -- Trademark information --
    LEE Homepage