LPD Series Pumps

Standard Performance Model

Configuration A

Configuration B

Unless otherwise specified, dimensions are in inches [mm]. Drawings are not to scale.

  • Wetted materials: TZP, port head (see table below), UHMW-PE, and 316 SS (3000 µL dispense volume only).
  • Dispense accuracy: ± 0.6% (100% total volume)
  • Home sensor (full discharge)
  • Motor: NEMA 17 bipolar stepper motor
  • Drive current:
    • 400-420 mA (RMS) per phase (50 µL, 250 µL and 1000 µL volumes)
    • 650-750 mA (RMS) per phase (3000 µL volume)
  • External valving required

Swipe to the right for more table information

Part Number
(click for
drawing
)
VOLUME
(µL)
PORT HEAD
MATERIAL1
FULL STEP
DISPENSE
Resolution
(µL)
MAXIMUM
DISCHARGE
PRESSURE
(psig)
PRECISION MAXIMUM
SPEED
HALF STEPS
(pps)
MAXIMUM
LENGTH
"L"
CONFIG-
URATION
CV%
(10% Total
Volume)
CV%
(100% Total
Volume)
LPDA2720150L 50 PMMA 0.04 60 ≤ 0.4% ≤ 0.04% 4000 5.24"
(133.1 mm)
A
LPDA2750150L 50 PEEK 0.04 60 ≤ 0.4% ≤ 0.04% 4000 5.24"
(133.1 mm)
B
LPDA2720125D 250 PMMA 0.2 60 ≤ 0.4% ≤ 0.04% 4000 5.24"
(133.1 mm)
A
LPDA2750125D 250 PEEK 0.2 60 ≤ 0.4% ≤ 0.04% 4000 5.24"
(133.1 mm)
B
LPDA2720110H 1000 PMMA 0.5 60 ≤ 0.4% ≤ 0.04% 4000 5.65"
(143.5 mm)
B
LPDA2750110H 1000 PEEK 0.5 60 ≤ 0.4% ≤ 0.04% 4000 5.65"
(143.5 mm)
B
LPDA2720130H 3000 PMMA 1.0 95 ≤ 0.4% ≤ 0.04% 4000 6.21"
(157.7 mm)
B
LPDA2750130H 3000 PEEK 1.0 95 ≤ 0.4% ≤ 0.04% 4000 6.21"
(157.7 mm)
B

(1) Click here for material information and abbreviations.

Cross Section View

Standard Performance Model - Shaded Drawing