LPV Series Pumps

Standard Manifold Mount Style

Standard Manifold Mount Style - Line Drawing

(Unless otherwise specified, dimensions are in inches [mm])
(Click on drawings to enlarge)

Standard Manifold Mount Style - Shaded Drawing

  • Wetted Materials: Piston (see chart below), UHMW-PE, EPDM, 316 SS
  • External valving required
  • Motor: Bipolar
  • Power:
    • 260-290 mA / phase (250 and 750 µL)
    • 210-240 mA / phase (50 µL)
  • For manifold boss, use Lee drawing:
    • 50 µL: LSIX1001350A
    • 250 µL: LSIX1001140A
    • 750 µL: LSIX1001120A

Swipe to the right for more table information

Part No.
(click for
drawing
)
VOLUME
(µL)
PISTON
MATERIAL1
FULL STEP
DISPENSE
(µL)
MAXIMUM
DISCHARGE
PRESSURE
(psig)
CV%
(10% Dispensed
Volume
)
CV%
(Full Dispensed
Volume
)
MAX. SPEED
HALF STEPS
(pps)
LENGTH "L" PISTON LENGTH "LP" PISTON DIAMETER "PD" WIDTH "W"
LPVA1000050L 50 TZP 0.1 30 0.4%
(@5 µL)
0.04%
(@50 µL)
1000 2.96" (68.3 mm) 0.51"
(13.0 mm)
0.088"
(1.68 mm)
1.25"
(31.75 mm)
LPVA1001050L 50 sapphire 0.1 30 0.4%
(@5 µL)
0.04%
(@50 µL)
1000 2.96" (68.3 mm) 0.51"
(13.0 mm)
0.088"
(1.68 mm)
1.25"
(31.75 mm)
LPVA1500025D 250 TZP 0.5 30 0.4%
(@25 µL)
0.04%
(@250 µL)
1000 3.42" (86.9 mm) 0.72"
(18.3 mm)
0.197"
(5.00 mm)
1.5"
(38.1 mm)
LPVA1501025D 250 sapphire 0.5 30 0.4%
(@25 µL)
0.04%
(@250 µL)
1000 3.42" (86.9 mm) 0.72"
(18.3 mm)
0.197"
(5.00 mm)
1.5"
(38.1 mm)
LPVA1500075D 750 TZP 1.5 15 0.4%
(@75 µL)
0.04%
(@750 µL)
1000 3.42" (86.9 mm) 0.57"
(14.5 mm)
0.341"
(5.00 mm)
1.5"
(38.1 mm)
LPVA1501075D 750 sapphire 1.5 15 0.4%
(@75 µL)
0.04%
(@750 µL)
1000 3.42" (86.9 mm) 0.57"
(14.5 mm)
0.341"
(5.00 mm)
1.5"
(38.1 mm)

(1) Click here for material information and abbreviations.