LPV Series Pumps

Standard Style

Standard Style - Line Drawing

(Unless otherwise specified, dimensions are in inches [mm])
(Click on drawings to enlarge)

Standard Style - Line Drawing

Standard Style - Shaded Drawing

  • Wetted Materials: Piston and Port Head (see chart below), UHMW-PE, EPDM
  • External valving required
  • Motor: Bipolar
  • Power:
    • 260-290 mA / phase (250 and 750 µL)
    • 210-240mA / phase (50 µL)

Swipe to the right for more table information

Part No.
(click for
drawing
)
VOLUME
(µL)
PISTON
MATERIAL1
PORT HEAD
MATERIAL1
FULL STEP
DISPENSE
(µL)
MAXIMUM
DISCHARGE
PRESSURE
(psig)
CV%
(10% Dispensed
Volume
)
CV%
(Full Dispensed
Volume
)
MAX. SPEED
HALF STEPS
(pps)
LENGTH
"L"
WIDTH
"W"
CONFIG-
URATION
LPVA1020050L 50 TZP PMMA 0.1 30 0.4%
(@5 µL)
0.04%
(@50 µL)
1000 3.90"
(99.1 mm)
1.25"
(31.7 mm)
A
LPVA1050050L 50 TZP PEEK 0.1 30 0.4%
(@5 µL)
0.04%
(@50 µL)
1000 3.90"
(99.1 mm)
1.25"
(31.7 mm)
A
LPVA1051050L 50 sapphire PEEK 0.1 30 0.4%
(@5 µL)
0.04%
(@50 µL)
1000 3.90"
(99.1 mm)
1.25"
(31.7 mm)
A
LPVA1520025D 250 TZP PMMA 0.5 30 0.4%
(@25 µL)
0.04%
(@250 µL)
1000 4.58"
(116.3 mm)
1.5"
(38.1 mm)
A
LPVA1550025D 250 TZP PEEK 0.5 30 0.4%
(@25 µL)
0.04%
(@250 µL)
1000 4.58"
(116.3 mm)
1.5"
(38.1 mm)
A
LPVA1551025D 250 sapphire PEEK 0.5 30 0.4%
(@25 µL)
0.04%
(@250 µL)
1000 4.58"
(116.3 mm)
1.5"
(38.1 mm)
A
LPVA1520075D 750 TZP PMMA 1.5 15 0.4%
(@75 µL)
0.04%
(@750 µL)
1000 4.61"
(117.1 mm)
1.5"
(38.1 mm)
A
LPVA1550075D 750 TZP PEEK 1.5 15 0.4%
(@75 µL)
0.04%
(@750 µL)
1000 4.61"
(117.1 mm)
1.5"
(38.1 mm)
B
LPVA1551075D 750 sapphire PEEK 1.5 15 0.4%
(@75 µL)
0.04%
(@750 µL)
1000 4.61"
(117.1 mm)
1.5"
(38.1 mm)
B

(1) Click here for material information and abbreviations.