a LFY Series Solenoid Valves - Valve Mounting Details

LFY Series Solenoid Valves

Valve Mounting Details

Valve Mounting

LFY valves may be mounted using #2 (2 mm) screws to a flat surface. Sufficient length must be provided to allow for the valve thickness and still allow proper engagement into the mounting surface. Screws should be torqued to 15 in-oz (0.11 N-m). Nylon screws can be used to prevent over torquing.

Nylon mounting Screws (#2)

  • LHWX0203770A: 1" long
  • LHWX0203990A: 1.25" long

Panel Mounting

  • 3200 Lohm valves require a 0.79" (20 mm) clearance hole with a maximum panel thickness of 0.44" (11 mm). Use panel nut LHWX0203250A to mount the valve.
  • 1000 Lohm valves require a 0.83" (21 mm) clearance hole with a maximum panel thickness of .44" (11 mm). Use panel nut LHWX0203760A to mount valve.

Electrical Characteristics

LFY valves are designed to run at the rated voltage +/- 5%