LHL Series Solenoid Valves

3-Port Latching - Face Mount: Conventional and Lo-Lohm Models

2-Port Face Mount Style Solenoid Valve

Optimized for applications that demand ultra-low power, low heat and small size, the 3-Port Latching HDI solenoid valve is ideal for compact, battery-operated portable instruments. This magnetically latched valve requires only momentary (10 to 30 ms) pulses to switch to and remain in each state, resulting in energy consumption of only 5.5 mJ per switch. The polarity of voltage on the terminal pins controls the switched position.

Standard part numbers for the Conventional and Lo-Lohm 3-Port Latching Face Mount style valves are listed below. The valves are offered in a variety of different flow rate ranges, seal materials and drive voltage configurations. The Lee Company also offers customized valve performance and manifold solutions to meet specific application requirements. Select the appropriate part number for your application in the table below, or contact your local Lee Sales Engineer for technical assistance.

FEATURES:

  • Magnetically latched
  • Low power consumption
  • Compact size: as small as 0.30" (W) x 1.25" (L)
  • Lightweight: less than 4.5 grams
  • Low internal volume: 72 µL
  • Cycle Life: 10 million cycles (silicone or FKM). Click here for additional information.
  • Leakage: 50 SµLPM max. at 5 psid air; 70°F (21°C) throughout rated cycle life
  • Flow Capacity: 800 and 1100 Lohm models available
  • Operating temperature range: 40°F to 120°F (4°C to 49°C)
  • Wetted materials: housing (PBT), Spring (316 SS) and epoxy. See table below for seal, plunger head and armature/plunger stop wetted materials.

Swipe to the right for more table information

Model Part Number
(click for
drawing
)
Voltage
(Vdc)
LOHM RATE1
ON AIR AT 70°F (21°C)
Operating Pressure Power
Consumption2
Wetted Materials3
Seal
Material
Plunger
Head
Armature /
Plunger Stop
Conventional LHLA0521111H 5 1100 Lohms 7.32 SLPM @15 psid;
Ref. Cv = 0.018)
Supply Vac - 45 psig
Differential 15 psid (max.)
5.5 Silicone PPS 430 SS
Conventional LHLA1221111H 12 1100 Lohms 7.32 SLPM @15 psid;
Ref. Cv = 0.018)
Supply Vac - 45 psig
Differential 15 psid (max.)
5.5 Silicone PPS 430 SS
Conventional LHLA2421111H 24 1100 Lohms 7.32 SLPM @15 psid;
Ref. Cv = 0.018)
Supply Vac - 45 psig
Differential 15 psid (max.)
5.5 Silicone PPS 430 SS
Conventional LHLA0521211H 5 1100 Lohms 7.32 SLPM @15 psid;
Ref. Cv = 0.018)
Supply Vac - 45 psig
Differential 15 psid (max.)
5.5 FKM PPA 430 SS
Conventional LHLA1221211H 12 1100 Lohms 7.32 SLPM @15 psid;
Ref. Cv = 0.018)
Supply Vac - 45 psig
Differential 15 psid (max.)
5.5 FKM PPA 430 SS
Conventional LHLA2421211H 24 1100 Lohms 7.32 SLPM @15 psid;
Ref. Cv = 0.018)
Supply Vac - 45 psig
Differential 15 psid (max.)
5.5 FKM PPA 430 SS
Conventional LHLA0521311H 5 1100 Lohms 7.32 SLPM @15 psid;
Ref. Cv = 0.018)
Supply Vac - 45 psig
Differential 15 psid (max.)
5.5 Silicone PPS FeCr Alloy4
Conventional LHLA1221311H 12 1100 Lohms 7.32 SLPM @15 psid;
Ref. Cv = 0.018)
Supply Vac - 45 psig
Differential 15 psid (max.)
5.5 Silicone PPS FeCr Alloy4
Conventional LHLA2421311H 24 1100 Lohms 7.32 SLPM @15 psid;
Ref. Cv = 0.018)
Supply Vac - 45 psig
Differential 15 psid (max.)
5.5 Silicone PPS FeCr Alloy4
Conventional LHLA0521411H 5 1100 Lohms 7.32 SLPM @15 psid;
Ref. Cv = 0.018)
Supply Vac - 45 psig
Differential 15 psid (max.)
5.5 FKM PPA FeCr Alloy4
Conventional LHLA1221411H 12 1100 Lohms 7.32 SLPM @15 psid;
Ref. Cv = 0.018)
Supply Vac - 45 psig
Differential 15 psid (max.)
5.5 FKM PPA FeCr Alloy4
Conventional LHLA2421411H 24 1100 Lohms 7.32 SLPM @15 psid;
Ref. Cv = 0.018)
Supply Vac - 45 psig
Differential 15 psid (max.)
5.5 FKM PPA FeCr Alloy4
Lo-Lohm LHLA0521380D 5 800 Lohms
(10 SLPM@15 psid;
Ref. Cv = 0.025)
Supply Vac - 45 psig
Differential 15 psid (max.)
28 Silicone PPS FeCr Alloy4
Lo-Lohm LHLA1221380D 12 800 Lohms
(10 SLPM@15 psid;
Ref. Cv = 0.025)
Supply Vac - 45 psig
Differential 15 psid (max.)
35 Silicone PPS FeCr Alloy4

(1) Click here for a full description of the Lohm Laws.
(2) Click here for complete electrical characteristics, and click here for electrical circuit design recommendations
(3) Click here for material information and abbreviations.
(4) Click here for valve dimensions and mounting requirements.

Cross Section View

3-Port Latching - Face Mount: Conventional and Lo-Lohm Models - Shaded Drawing