The following specifications apply to all LHL Series valves, unless otherwise noted.
Maximum of 50 µL/minute of air at 70°F with 5 psig applied to the common port.
The valves weigh only 4 grams.
The valves will typically operate up to 250 million cycles on air, depending on the seal material and application parameters.
The valves will operate within the specified pressure range when supplied with the rated voltage ± 5%. The normally closed port seal is spring loaded, so the pressure applied to this port should not exceed the pressure on the common port or the normally open port unless otherwise indicated.
|INTERNAL SELF-HEATED COIL TempERATURE
at 100% Duty, 72°F Ambient ENVIRONMENT
Storage Conditions (Recommended)
Coil Type (DC)
|@ Rated Voltage (10 psig)|
The tube ports are designed for soft, flexible 1/16" ID tubing.
Surface mount valves use #2 socket head cap screws. Refer to inspection drawings for torque specification.
Filtration of 35 microns or finer is recommended.
The following chart describes the basic electrical characteristics for the LHL Series valves at room temperature. Click here for Solenoid Coil Electrical Characteristics. Click here for special drive circuits.
RATED VOLTAGE (mW)