LHL Series Solenoid Valves

Standard, 2-Port Plug-In Style Manifolds

The Lee Company offers several standard manifold configurations to ease the setup of prototype systems. These off-the-shelf manifolds are available in mounting denominations of single valve (1x), three valves (3x) and eight valves (8x). Combine these denominations, or plug unused ports to configure the setup for your specific application.

  • Individual Ports: This manifold configuration will allow for tubing connections to each individual valve port.
  • Port A Inlet Header, Individual Port B Outlet Ports: This manifold configuration provides a shared inlet header line to all valve inlet ports, and also provides individual tubing connections to the outlet port of each valve.

Swipe to the right for more table information

PART NUMBER DESCRIPTION DIMENSION
"A"
DIMENSION
"B"
LFMX0524000A1 Manifold, 1x HDI, 2-Port, Plug-In, Individual Ports, Acrylic
LFMX0528200B1 Manifold, 1x HDI, 2-Port, Plug-In, Individual Ports, Aluminum
LFMX0527650B1 Manifold, 3x HDI, 2-Port, Plug-In, Individual Ports, Aluminum 1.30" (33.0mm) 1.05" (26.7mm)
LFMX0527700B1 Manifold, 8x HDI, 2-Port, Plug-In, Individual Ports, Aluminum 2.80" (71.1mm) 2.55" (64.8mm)
LFMX0527750B2 Manifold, 3x HDI, 2-Port, Plug-In, Port A Inlet Header, Individual Port B Outlet Ports, Aluminum 1.50" (38.1mm) 1.25"
(31.8mm)
LFMX0527800B2 Manifold, 8x HI, 2-Port, Plug-In, Port A Inlet Header, Individual Port B Outlet Ports, Aluminum 3.00" (76.2mm) 2.75" (69.9mm)

(1) Manifold for use with Lee Company, HDI 2-Port style solenoid valves rated to 450 Lohms or higher.
(2) Manifold for use with Lee Company, HDI 2-Port style solenoid valves, rated to 1100 Lohms or higher.

Part Numbers are for the manifold and secondary retention bracket only. Valves are sold separately.
Refer to Manifold Technology for custom design capabilities.
HDI Platform valves require only 0.300" center to center spacing.

Individual Ports

Port A Inlet Header, Individual Port B Outlet Ports