LHL Series Solenoid Valves

Standard 3-Port Face Mount Style Manifolds

The Lee Company offers several standard manifold configurations to ease the setup of prototype systems. These off-the-shelf manifolds are available in mounting denominations of single valve (1x), three valves (3x) and eight valves (8x). Combine these denominations, or plug unused ports to configure the setup for your specific application.

  • Individual Ports: This manifold configuration will allow for tubing connections to each individual valve port.
  • Normally Open and Normally Closed Header, Individual Common Ports: This manifold configuration provides a shared inlet header line to the normally open ports of the valves, a shared inlet header line to the normally closed ports of the valves, and also provides individual tubing connections to the common port of each valve.
  • Common Header, Individual Normally Open and Normally Closed Ports: This manifold configuration provides a shared inlet header line to the common ports of all valves, and also provides individual tubing connections to the normally closed and normally open valve ports.
PART NUMBER DESCRIPTION DIMENSION
"A"
DIMENSION
"B"
LFMX0507200A1 Manifold, 1x HDI, 3-Port, Face Mount, Individual Ports, Aluminum 0.44"
(11.2 mm)
0.30"
(7.6 mm)
LFMX0510513B1 Manifold, 3x HDI, 3-Port, Face Mount, Individual Ports, Aluminum 1.35"
(34.3 mm)
1.10"
(27.9 mm)
LFMX0510518B1 Manifold, 8x HDI, 3-Port, Face Mount, Individual Ports, Aluminum 2.86"
(72.6 mm)
2.59"
(65.8 mm)
LFMX0510523B2 Manifold, 3x HDI, 3-Port, Face Mount, Common Header, Individual NC & NO Ports, Aluminum 1.51"
(38.4 mm)
1.29"
(32.8 mm)
LFMX0510528B2 Manifold, 8x HDI, 3-Port, Face Mount, Common Header, Individual NC & NO Ports, Aluminum 3.02"
(76.7 mm)
2.79"
(70.9 mm)
LFMX0510533B2 Manifold, 3x HDI, 3-Port, Face Mount, NC & NO Header, Individual Common Ports, Aluminum 1.55"
(39.4 mm)
1.28"
(32.5 mm)
LFMX0510538B2 Manifold, 8x HDI, 3-Port, Face Mount, NC & NO Header, Individual Common Ports, Aluminum 3.05"
(77.5 mm)
2.78"
(70.6 mm)


(1) Manifold for use with Lee Company HDI 3-Port style solenoid valves rated to 800 Lohms or higher.
(2) Manifold for use with Lee Company HDI 3-Port style solenoid valves rated to 1100 Lohms or higher.

Part numbers are for the manifold and secondary retention bracket only. Valves are sold separately.
Click here for mounting hardware part numbers
Refer to Manifold Technology for customized manifold assemblies.
Ø 0.083" OD ports are intended for connection to 1/16" ID soft tubing.

Individual Ports

Normally Open and Normally Closed Header, Individual Common Ports

Common Header, Individual Normally Open and Normally Closed Ports

Unless otherwise specified, dimensions are in inches [mm]. Drawings are not to scale.