LHL Series Solenoid Valves

Standard 3-Port Plug-In Style Manifolds

The Lee Company offers several standard manifold configurations to ease the setup of prototype systems. These off-the-shelf manifolds are available in mounting denominations of single valve (1x), three valves (3x) and eight valves (8x). Combine these denominations, or plug unused ports to configure the setup for your specific application.

  • Individual Ports: This manifold configuration will allow for tubing connections to each individual valve port.
  • Normally Open and Normally Closed Header, Individual Common Ports: This manifold configuration provides a shared inlet header line to the normally open ports of the valves, a shared inlet header line to the normally closed ports of the valves, and also provides individual tubing connections to the common port of each valve.
  • Common Header, Individual Normally Open and Normally Closed Ports: This manifold configuration provides a shared inlet header line to the common ports of all valves, and also provides individual tubing connections to the normally closed and normally open ports of each valve.

Swipe to the right for more table information

PART NUMBER DESCRIPTION DIMENSION
"A"
DIMENSION
"B"
LFMX0503800A1 Manifold, 1x HDI, 3-Port, Plug-In, Individual Ports, Acrylic
LFMX0522450B1 Manifold, 1x HDI, 3-Port, Plug-In, Individual Ports, Aluminum 0.75"
(19.1 mm)
0.50"
(12.7 mm)
LFMX0510413B1 Manifold, 3x HDI, 3-Port, Plug-In, Individual Ports, Aluminum 1.35"
(34.3 mm)
1.10"
(27.9 mm)
LFMX0510418B1 Manifold, 8x HDI, 3-Port, Plug-In, Individual Ports, Aluminum 2.85"
(72.4 mm)
2.60"
(66.0 mm)
LFMX0510423B2 Manifold, 3x HDI, 3-Port, Plug-In, Common Header, Individual NC & NO Ports, Aluminum 1.50"
(38.1 mm)
1.25"
(31.8 mm)
LFMX0510428B2 Manifold, 8x HDI, 3-Port, Plug-In, Common Header, Individual NC & NO Ports, Aluminum 3.00"
(76.2 mm)
2.75"
(69.9 mm)
LFMX0510433B2 Manifold, 3x HDI, 3-Port, Plug-In, NC &NO Header, Individual Common Ports, Aluminum 1.50"
(38.1 mm)
1.25"
(31.8 mm)
LFMX0510438B2 Manifold, 8x HDI, 3-Port, Plug-In, NC & NO Header, Individual Common Ports, Aluminum 3.00"
(76.2 mm)
2.75"
(69.9 mm)


(1) Manifold for use with Lee Company HDI 3-Port style solenoid valves rated to 450 Lohms or higher.
(2) Manifold for use with Lee Company HDI 3-Port style solenoid valves rated to 1100 Lohms or higher.

Part numbers are for the manifold and secondary retention bracket only. Valves are sold separately.
Refer to Manifold Technology for custom design capabilities.
Ø 0.083" OD ports are intended for connection to 1/16" ID soft tubing.

Individual Ports

Normally Open and Normally Closed Header, Individual Common Ports

Common Header, Individual Normally Open and Normally Closed Ports

Unless otherwise specified, dimensions are in inches [mm]. Drawings are not to scale.