VHS Series Solenoid Valves

062 MINSTAC Inlet Port / Direct Dispense Outlet

062 MINSTAC Inlet Port / Direct Dispense Outlet - Line Drawing

(Unless otherwise specified, dimensions are in inches [mm])
(Click on drawings to enlarge)

062 MINSTAC Inlet Port / Direct Dispense Outlet - Shaded Drawing

MINSTAC direct dispense valves are available in two different styles (LT and VJ), both allowing repeatable direct dispensing from the valve without the need for an additional nozzle. The 062 MINSTAC inlet port allows the valve to be used with Teflon® tubing and the Lee 062 MINSTAC Fitting System.

The LT style has a sapphire orifice plate and incorporates an internal pressure compensation bladder. This allows the droplet to retain its integrity longer and travel further. The VJ style does not have a pressure bladder. This reduces the throw distance slightly, but makes the valve easier to flush.

  • Weight: 1.8 grams
  • Internal Volume:
                      LT Style: 35 µL
                      VJ Style: 55 µL
  • Pulse Voltage: 24 vdc
  • Hold Voltage: 7.5 vdc (maximum), 5.0 vdc (recommended)
  • Wetted materials (in addition to seal): Stainless Steel, PEEK, PPS, Sapphire, Epoxy

Swipe to the right for more table information

Part
Number
STYLE ORIFICE
DIAMETER
SEAL
MATERIAL2
LOHMS MIN. SPIKE
DURATION1
(MS)
PRESSURE
(PSIG)
INKA2435010H LT 0.003" (0.076 mm) SI/BUTYL 110000 0.35 30
INKA2455010H LT 0.005" (0.127 mm) SI/BUTYL 50000 0.35 30
INKA2475010H LT 0.007" (0.178 mm) SI/BUTYL 21000 0.35 30
INKA2435210H LT 0.003" (0.076 mm) EPDM/BUTYL 110000 0.35 30
INKA2455210H LT 0.005" (0.127 mm) EPDM/BUTYL 50000 0.35 30
INKA2475210H LT 0.007" (0.178 mm) EPDM/BUTYL 21000 0.35 30
INKA2435110H LT 0.003" (0.076 mm) FKM/BUTYL 110000 0.5 30
INKA2455110H LT 0.005" (0.127 mm) FKM/BUTYL 50000 0.5 30
INKA2475110H LT 0.007" (0.178 mm) FKM/BUTYL 21000 0.5 30
INKA2435510H LT 0.003" (0.076 mm) FFKM/BUTYL 110000 0.5 30
INKA2455510H LT 0.005" (0.127 mm) FFKM/BUTYL 50000 0.5 30
INKA2475510H LT 0.007" (0.178 mm) FFKM/BUTYL 21000 0.5 30
INKA2436010H VJ 0.003" (0.076 mm) SI 110000 0.35 120
INKA2456010H VJ 0.005" (0.127 mm) SI 50000 0.35 120
INKA2476010H VJ 0.007" (0.178 mm) SI 21000 0.35 120
INKA2436210H VJ 0.003" (0.076 mm) EPDM 110000 0.35 120
INKA2456210H VJ 0.005" (0.127 mm) EPDM 50000 0.35 120
INKA2476210H VJ 0.007" (0.178 mm) EPDM 21000 0.35 120
INKA2436110H VJ 0.003" (0.076 mm) FKM 110000 0.5 120
INKA2456110H VJ 0.005" (0.127 mm) FKM 50000 0.5 120
INKA2476110H VJ 0.007" (0.178 mm) FKM 21000 0.5 120
INKA2436510H VJ 0.003" (0.076 mm) FFKM 110000 0.5 120
INKA2456510H VJ 0.005" (0.127 mm) FFKM 50000 0.5 120
INKA2476510H VJ 0.007" (0.178 mm) FFKM 21000 0.5 120

(1) Click here for complete electrical characteristics
(2) Click here for material information and abbreviations.