VHS Series Solenoid Valves

Standard Inlet Port / Direct Dispense Outlet

Standard Inlet Port / Direct Dispense Outlet - Line Drawing

(Unless otherwise specified, dimensions are in inches [mm])
(Click on drawings to enlarge)

Standard Inlet Port / Direct Dispense Outlet - Shaded Drawing

Ported direct dispense valves are available in two different styles (LT and VJ), both allowing repeatable direct dispensing from the valve without the need for an additional nozzle. The 0.05" diameter inlet port is designed for use with 1/32" ID soft tubing.

The LT style has a sapphire orifice plate and incorporates an internal pressure compensation bladder. This allows the droplet to retain its integrity longer and travel further. The VJ style does not have a pressure bladder. This reduces the throw distance slightly, but makes the valve easier to flush.

  • Weight: 1.8 grams
  • Internal Volume:
                       LT Style: 35 µL
                       VJ Style: 55 µL
  • Pulse Voltage: 24 vdc
  • Hold Voltage: 7.5 vdc (maximum), 5.0 vdc (recommended)
  • Wetted materials (in addition to seal): Stainless Steel, PEEK, PPS, Sapphire, Epoxy

Swipe to the right for more table information

Part
Number
STYLE ORIFICE
DIAMETER
SEAL
MATERIAL2
LOHMS MIN. SPIKE
DURATION1
(MS)
PRESSURE
(PSIG)
INKA2437010H LT 0.003" (0.076 mm) SI/BUTYL 110000 0.35 30
INKA2457010H LT 0.005" (0.127 mm) SI/BUTYL 50000 0.35 30
INKA2477010H LT 0.007" (0.178 mm) SI/BUTYL 21000 0.35 30
INKA2437210H LT 0.003" (0.076 mm) EPDM/BUTYL 110000 0.35 30
INKA2457210H LT 0.005" (0.127 mm) EPDM/BUTYL 50000 0.35 30
INKA2477210H LT 0.007" (0.178 mm) EPDM/BUTYL 21000 0.35 30
INKA2437110H LT 0.003" (0.076 mm) FKM/BUTYL 110000 0.5 30
INKA2457110H LT 0.005" (0.127 mm) FKM/BUTYL 50000 0.5 30
INKA2477110H LT 0.007" (0.178 mm) FKM/BUTYL 21000 0.5 30
INKA2437510H LT 0.003" (0.076 mm) FFKM/BUTYL 110000 0.5 30
INKA2457510H LT 0.005" (0.127 mm) FFKM/BUTYL 50000 0.5 30
INKA2477510H LT 0.007" (0.178 mm) FFKM/BUTYL 21000 0.5 30
INKA2438010H VJ 0.003" (0.076 mm) SI 110000 0.35 30
INKA2458010H VJ 0.005" (0.127 mm) SI 50000 0.35 30
INKA2478010H VJ 0.007" (0.178 mm) SI 21000 0.35 30
INKA2438210H VJ 0.003" (0.076 mm) EPDM 110000 0.35 30
INKA2458210H VJ 0.005" (0.127 mm) EPDM 50000 0.35 30
INKA2478210H VJ 0.007" (0.178 mm) EPDM 21000 0.35 30
INKA2438110H VJ 0.003" (0.076 mm) FKM 110000 0.5 30
INKA2458110H VJ 0.005" (0.127 mm) FKM 50000 0.5 30
INKA2478110H VJ 0.007" (0.178 mm) FKM 21000 0.5 30
INKA2438510H VJ 0.003" (0.076 mm) FFKM 110000 0.5 30
INKA2458510H VJ 0.005" (0.127 mm) FFKM 50000 0.5 30
INKA2478510H VJ 0.007" (0.178 mm) FFKM 21000 0.5 30

(1) Click here for complete electrical characteristics
(2) Click here for material information and abbreviations.