VHS Series Solenoid Valves

Standard Port Inlet / Small Port Outlet (P/SP)

Standard Port Inlet / Small Port Outlet (P/SP) - Line Drawing

(Unless otherwise specified, dimensions are in inches [mm])
(Click on drawings to enlarge)

VHS P/SP valves are designed for use with 1/32" ID soft (flexible) tubing on the inlet port. The outlet port can be used for direct dispensing. If smaller volumes and greater accuracy is desired, jeweled nozzles can be attached to the valve with tubing (see Nozzles). This allows nozzles to be placed closer than the actual valve center to center distance.

  • Flow restriction: 11,000 Lohms (Cv = 0.001)
  • Weight: 1.8 grams
  • Internal Volume: 30 microliters
  • Wetted materials (in addition to seal): Stainless Steel, PEEK, PPS, Epoxy

Swipe to the right for more table information

Part
Number
SPIKE
Voltage
(vdc)
MAXIMUM
HOLD
VOLTAGE
(vdc)
RECOMMENDED
HOLD
VOLTAGE
(vdc)
MIN. SPIKE
DURATION1
(MS)
PRESSURE
(PSIG)
SEAL
MATERIAL2
INKA1226212H 12 2.3 1.6 0.35 10 EPDM
INKA2426212H 24 4.5 3.2 0.35 10 EPDM
INKX0508600A 12 2.3 1.6 0.5 10 FKM
INKX0508650A 24 4.5 3.2 0.5 10 FKM
INKX0507000A 12 2.3 1.6 0.5 10 FFKM
INKX0516500A 24 4.5 3.2 0.5 10 FFKM
INKX0508700A 12 2.3 1.6 0.25 10 SI
INKX0508750A 24 4.5 3.2 0.25 10 SI

(1) Click here for complete electrical characteristics.
(2) Click here for material information and abbreviations.