VHS Series Solenoid Valves

Standard Port Inlet / Standard Port Outlet (P/P)

Standard Port Inlet / Standard Port Outlet (P/P) - Line Drawing

(Unless otherwise specified, dimensions are in inches [mm])
(Click on drawings to enlarge)

VHS P/P valves are designed for use with 1/32" ID soft (flexible) tubing. This allows nozzles to be placed closer than the actual valve center to center distance. Separate nozzles allow for fine tuning of the dispense volume range (see Nozzles).

  • Flow restriction: 4750 Lohms (Cv = 0.004)
  • Weight: 1.8 grams
  • Internal Volume: 30 microliters
  • Wetted materials (in addition to seal): Stainless Steel, PEEK, PPS, Epoxy

Swipe to the right for more table information

Part
Number
SPIKE
Voltage
(vdc)
MAXIMUM
HOLD
VOLTAGE
(vdc)
RECOMMENDED
HOLD
VOLTAGE
(vdc)
MIN. SPIKE
DURATION1
(MS)
PRESSURE
(PSIG)
SEAL
MATERIAL2
INKA1224212H 12 2.3 1.6 0.35 10 EPDM
INKA2424212H 24 4.5 3.2 0.35 10 EPDM
INKX0508450A 12 2.3 1.6 0.5 10 FKM
INKX0514550A 24 4.5 3.2 0.5 10 FKM
INKX0511900A 12 2.3 1.6 0.5 10 FFKM
INKX0516550A 24 4.5 3.2 0.5 10 FFKM
INKX0508500A 12 2.3 1.6 0.25 10 SI
INKX0508550A 24 4.5 3.2 0.25 10 SI

(1) Click here for complete electrical characteristics
(2) Click here for material information and abbreviations.