Need help fast? Call 1-800-LEE-PLUG

062 MINSTAC Inlet Port / Direct Dispense Outlet

Unless otherwise specified, dimensions are in inches [mm]. Drawings are not to scale.

MINSTAC direct dispense valves are available in two different styles (LT and VJ), both allowing repeatable direct dispensing from the valve without the need for an additional nozzle. The 062 MINSTAC inlet port allows the valve to be used with PTFE tubing and the Lee 062 MINSTAC Fitting System. Refer to MINSTAC for additional details.

  • The LT style has a sapphire orifice plate and incorporates an internal pressure compensation bladder. This allows the droplet to retain its integrity longer so it can travel farther.
  • The VJ style does not have a pressure bladder. This reduces the throw distance slightly, but makes the valve easier to flush.
  • Weight: 1.8 grams
  • Internal volume:
    • LT Style: 35 µL
    • VJ Style: 60 µL
  • Spike voltage: 24 Vdc
  • Hold voltage: 5.0 Vdc (minimum), 7.5 Vdc (maximum)
  • Wetted materials: stainless steel, butyl (LT Style only), PEEK, PPS, sapphire, seal material and epoxy

Swipe to the right for more table information

Part Number
(click for
drawing
)
STYLE ORIFICE
DIAMETER
LOHM
RATE1
MINIMUM SPIKE
DURATION2
(MS)
OPERATING
PRESSURE
(PSIG)
SEAL
MATERIAL3
INKA2435010H LT 0.003" (0.076 mm) 110,000 0.35 0-30 SI
INKA2455010H LT 0.005" (0.127 mm) 50,000 0.35 0-30 SI
INKA2475010H LT 0.007" (0.178 mm) 21,000 0.35 0-30 SI
INKA2435210H LT 0.003" (0.076 mm) 110,000 0.35 0-30 EPDM
INKA2455210H LT 0.005" (0.127 mm) 50,000 0.35 0-30 EPDM
INKA2475210H LT 0.007" (0.178 mm) 21,000 0.35 0-30 EPDM
INKA2435110H LT 0.003" (0.076 mm) 110,000 0.50 0-30 FKM
INKA2455110H LT 0.005" (0.127 mm) 50,000 0.50 0-30 FKM
INKA2475110H LT 0.007" (0.178 mm) 21,000 0.50 0-30 FKM
INKA2435510H LT 0.003" (0.076 mm) 110,000 0.50 0-30 FFKM
INKA2455510H LT 0.005" (0.127 mm) 50,000 0.50 0-30 FFKM
INKA2475510H LT 0.007" (0.178 mm) 21,000 0.50 0-30 FFKM
INKA2436010H VJ 0.003" (0.076 mm) 110,000 0.35 0-120 SI
INKA2456010H VJ 0.005" (0.127 mm) 50,000 0.35 0-120 SI
INKA2476010H VJ 0.007" (0.178 mm) 21,000 0.35 0-120 SI
INKA2436210H VJ 0.003" (0.076 mm) 110,000 0.35 0-120 EPDM
INKA2456210H VJ 0.005" (0.127 mm) 50,000 0.35 0-120 EPDM
INKA2476210H VJ 0.007" (0.178 mm) 21,000 0.35 0-120 EPDM
INKA2436110H VJ 0.003" (0.076 mm) 110,000 0.50 0-120 FKM
INKA2456110H VJ 0.005" (0.127 mm) 50,000 0.50 0-120 FKM
INKA2476110H VJ 0.007" (0.178 mm) 21,000 0.50 0-120 FKM
INKA2436510H VJ 0.003" (0.076 mm) 110,000 0.50 0-120 FFKM
INKA2456510H VJ 0.005" (0.127 mm) 50,000 0.50 0-120 FFKM
INKA2476510H VJ 0.007" (0.178 mm) 21,000 0.50 0-120 FFKM

(1) Click here for a full description of the Lohm Laws.
(2) Click here for complete electrical characteristics
(3) Click here for material information and abbreviations.

Cross Section View