Need help fast? Call 1-800-LEE-PLUG

062 MINSTAC Inlet / Small Port Outlet (M/SP)

Unless otherwise specified, dimensions are in inches [mm]. Drawings are not to scale.

VHS M/SP valves are designed for use with 062 MINSTAC fittings on the inlet port, allowing easy connections to PTFE tubing. Refer to MINSTAC for additional details. The outlet port can be used for direct dispensing. If smaller volumes and greater accuracy are desired, jeweled nozzles can be attached to the valve with tubing. This allows nozzles to be placed closer than the actual valve center to center distance. Refer to Nozzles for additional details.

  • Lohm rate: 11,000 Lohms (Ref. Cv = 0.001). Click here for a full description of the Lohm Laws.
  • Weight: 1.8 grams
  • Internal volume: 35 µL
  • Wetted materials: stainless steel, PEEK, PPS, seal material and epoxy

Swipe to the right for more table information

Part Number
(click for
drawing
)
SPIKE
Voltage
(vdc)
RECOMMENDED
HOLD
VOLTAGE
(vdc)
MAXIMUM
HOLD
VOLTAGE
(vdc)
MINIMUM SPIKE
DURATION1
(MS)
OPERATING
PRESSURE
(PSIG)
SEAL
MATERIAL2
INKX0514900A 12 1.6 2.3 0.35 0-120 EPDM
INKX0514950A 24 3.2 4.5 0.35 0-120 EPDM
INKX0514650A 12 1.6 2.3 0.50 0-120 FKM
INKX0508350A 24 3.2 4.5 0.50 0-120 FKM
INKX0516200A 12 1.6 2.3 0.50 0-120 FFKM
INKX0516250A 24 3.2 4.5 0.50 0-120 FFKM
INKX0516100A 12 1.6 2.3 0.25 0-120 SI
INKX0508400A 24 3.2 4.5 0.25 0-120 SI

(1) Click here for complete electrical characteristics.
(2) Click here for material information and abbreviations.