Close Menu
Solenoid Valves

Zero-Leak 2-Way Polyimide Seat Single-Coil Solenoid Valve

This zero-leak solenoid valve incorporates a polyimide ball seat to eliminate leakage. The valve is acceptance tested to guarantee leakage of zero bubbles of nitrogen per minute with 500 to 3000 psid of pressure on the inlet port. The valve’s 2-way, pressure assist to close configuration offers added safety in the event of a failure. This design utilizes MultiSeal® technology, eliminating the need for O-rings, simplifying port layout, and offering significant space and weight savings.

Key Product Facts
  • Lohm Rate:3500 Lohms max
  • Operating Pressure:500 - 3000 psid
  • Leakage:0 bubbles / minute on nitrogen
  • Weight:0.25 lbs max (lead wire version)
  • Pressure Assist to Close Design

Product Information

General Performance
CHARACTERISTIC SPECIFICATION
Operating Pressure 500 - 3000 psid
Operating Ambient Temperature -65°F to 275°F
Operating Fluid Temperature -65°F to 275°F
Internal Leakage 0 Bubbles / Minute on Nitrogen (500 - 3000 psid)
External Leakage 0 cc
Lohm Rate 3500 Lohms Max
Current Drain 0.28 amps at 28 VDC at 70°F (7.8 Watts)
Max Operating Voltage 32.2 VDC
Resistance 92 - 108 Ohms at 70°F
Pull-In Voltage 18 VDC Max at 275°F and Rated Pressure
Dropout Voltage 1 VDC Min at 70°F and Rated Pressure
Pull-In Response Time
(28 VDC at 70°F and Rated Pressure)
0.050 Seconds Max
Dropout Response Time
(28 VDC at 70°F and Rated Pressure)
0.050 Seconds Max
Nominal Screen Hole Size 0.004 inches
Weight Lead Wire Style: 0.25 lbs Max
Connector Style: 0.28 lbs Max
Materials
Wetted Parts
Part Material Specification Finish
Filter Screen 304L CRES ASTM A666 Passivated
MultiSeal Polyamide-Imide AMS 3670
Body and Ball Guide 15-5 PH CRES AMS 5659 Passivated
Ball and Pin 440C CRES AMS 5630 Passivated
Ball Seat Polyimide AMS 3644
Shaft 440C CRES AMS-QQ-S-763 Passivated
Spring 302 CRES AMS 5688 Passivated
Spring Guide Si Iron BFM ASTM A867 Nickel Plate / AMS 2404
Plug and Pushrod 303 CRES QQ-S-763C Passivated
Flanges and Plungers Si Iron BFM ASTM A867 Nickel Plate / AMS 2404
Shunt 22-13-5 CRES AMS 5764 Nickel Plate / AMS 2404
Shims and Spacers 302 CRES ASTM A666 Passivated
Braze Silver Alloy AMS 4774 Nickel Plate / AMS 2404
Non-Wetted Parts
Part Material Specification Finish
Cover Si Iron BFM ASTM A867 Nickel Plate / AMS 2404
Retainer 2024 T-351 AL AMS-QQ-A-225 / 6 Anodize / MIL-PRF-8625 Type II
Retaining Ring 302 CRES ASTM A313 / A313M Passivated
Coil Copper Magnet Wire NEMA MW1000 / MW16
Shrink Tube PVDF and PTFE AMS-DTL-23053 / 8 & / 12
Insulation Tape Polyimide ASTM D5213
Solder Sb05A J-STD-006
Potting Compound Stycast 2762FT, Catalyst 17
Lead Wire* 22 AWG SAE AS22759 / 11
Connector Shell** 300 Series CRES Passivated
Connector Pins** Gold Plated
Connector Seal** Fluorosilicone Elastomer
Connector Sleeve** 304 CRES AMS-QQ-S-763 Passivated
Connecting Wire** 26 AWG SAE AS22759 / 11

*Applicable to lead wire versions only.

**Applicable to connector versions only.

Flow Curve
Cross Section View
Dimensional Views
Mounting Details

Part Numbers & Specifications

This table below contains the part numbers and technical specifications for this product. If you have specific questions, need a quote, or would like to request a handbook or drawing, click the red request button in the column on the far right.

Part Numbers & Specifications
Part Number Rated Pressure (psi) Test Fluid Configuration Electrical Interface Request Information
SDPB3321012A 3000 MIL-PRF-5606, MIL-PRF-83282 and Nitrogen Normally Open Lead Wire Front Request
SDPB3321012B 3000 MIL-PRF-5606, MIL-PRF-83282 and Nitrogen Normally Open Lead Wire Rear Request
SDPB3321012E 3000 MIL-PRF-5606, MIL-PRF-83282 and Nitrogen Normally Open Connector Request
SDPB3321013A 3000 MIL-PRF-5606, MIL-PRF-83282 and Nitrogen Normally Closed Lead Wire Front Request
SDPB3321013B 3000 MIL-PRF-5606, MIL-PRF-83282 and Nitrogen Normally Closed Lead Wire Rear Request
SDPB3321013E 3000 MIL-PRF-5606, MIL-PRF-83282 and Nitrogen Normally Closed Connector Request

Installation & Accessories

Replacement Parts & Accessories
Part Number Description
CUTA3320321B MultiSeal Extraction Tool
SDBB3320108A Replacement MultiSeal
CUTA3320122A Test Fixture
Get in touch

Questions?

From plugs to solenoid valves, there’s a vast array of products that The Lee Company can offer. If you’d like to discuss the best solution for your specific application or to learn more about our capabilities, use-cases, or quality standards, contact your local Lee sales engineer.