Unless otherwise specified, dimensions are in inches [mm]. Drawings are not to scale.
VHS P/SP valves are designed for use with 1/32" ID soft (flexible) tubing on the inlet port. The outlet port can be used for direct dispensing. If smaller volumes and greater accuracy are desired, jeweled nozzles can be attached to the valve with tubing. This allows nozzles to be placed closer than the actual valve center to center distance. Refer to Nozzles for additional details.
Swipe to the right for more table information
Part Number (click for drawing) |
SPIKE Voltage (vdc) |
RECOMMENDED HOLD VOLTAGE (vdc) |
MAXIMUM HOLD VOLTAGE (vdc) |
MINIMUM SPIKE DURATION1 (MS) |
OPERATING PRESSURE (PSIG) |
SEAL MATERIAL2 |
---|---|---|---|---|---|---|
INKA1226212H | 12 | 1.6 | 2.3 | 0.35 | 0-30 | EPDM |
INKA2426212H | 24 | 3.2 | 4.5 | 0.35 | 0-30 | EPDM |
INKX0508600A | 12 | 1.6 | 2.3 | 0.50 | 0-30 | FKM |
INKX0508650A | 24 | 3.2 | 4.5 | 0.50 | 0-30 | FKM |
INKX0507000A | 12 | 1.6 | 2.3 | 0.50 | 0-30 | FFKM |
INKX0516500A | 24 | 3.2 | 4.5 | 0.50 | 0-30 | FFKM |
INKX0508700A | 12 | 1.6 | 2.3 | 0.25 | 0-30 | SI |
INKX0508750A | 24 | 3.2 | 4.5 | 0.25 | 0-30 | SI |
(1) Click here for complete electrical characteristics.
(2) Click here for material information and abbreviations.