Close Menu

Plugs

Browse Plugs
Plugs for Diagnostics

Expansion Plugs for Fluidic & Pneumatic Manifoldsin Diagnostics Equipment

Diagnostic castings and manifolds are often complex, with numerous channels and passages that must be precisely connected to function properly. To achieve this, a process called “cross-drilling” is often required, where holes are drilled through the outer shell and internal channels of the casting. These cross-holes must then be sealed, which is why The Lee Company developed engineered expansion plugs for the diagnostic market. The Lee Betaplug® was designed to seal cross-holes in metal or plastic housings using a tapered plug and installation hole design, while the DL Series Plug* is ideal for sealing cross-holes in aluminum housings with a straight hole and shoulder design.

Lee Betaplug® expansion plugs operate without the need for threads, sealants, or O-rings. These pre-assembled, tapered plugs seal cross-holes using controlled expansion. The lands and grooves on the plug’s outer diameter bite into the housing wall during installation, creating a leak-tight seal and ensuring retention. This single-assembly design reduces costs, making the component cost-effective for mass production.

The tapered design of the Lee Betaplug® eliminates the need for tight manufacturing tolerances, which is ideal for high-volume applications. The matching tapers of the Betaplug and its installation hole create a perfect fit, eliminating the need for additional expansion. Since the size of the tapered pin precisely controls the Betaplug’s expansion, the amount of expansion and any resulting boss stress is completely predictable. This means that installation is repeatable – the same size plug will create the same stress, which is ideal for brittle materials or thin wall conditions.

The DL Series Plug is a single-piece, stainless-steel expansion plug specifically designed to seal holes in aluminum housings. DL Series Plugs seal straight cylindrical bores and sit on a chamfered installation shoulder. These expansion plugs are designed to be as shallow as possible in order to reduce space and manifold weight. 

For this expansion plug, Lee developed the Drive Locking® technology which is purposely designed to facilitate reliable automated installation and verification processes, allowing customers to reduce scrap and labor costs while improving the reliability of their production processes. Visual indication of a proper installation is valuable for both low and high volume production as it adds a level of reliability and accountability to your manufacturing process.

*Patent Pending

6000 Series Betaplug

The 6000 Series Betaplug is built for high-pressure diagnostics systems. Design the 6000 Series Betaplug into systems up to 7000 psi, and choose from parts that range from 4 mm to 8 mm in diameter.

Short Betaplug®

The Short Betaplug was developed to optimize process and product settings and allows for the shortest installed height. Install the Short Betaplug in systems up to 500 psi, and choose plugs that range from 5 mm to 20 mm in diameter.

DL Series Plug

The DL Series Plug* is a single-piece, stainless-steel expansion plug engineered to create a leak-tight seal in aluminum housings without the use of threads, sealants, or O-rings. This plug’s Drive Locking® technology is purposely designed to facilitate reliable automated installation and verification processes, allowing customers to reduce scrap and labor costs while improving the reliability of their production processes.

*Patent Pending

Support & Resources

Support & Resources from a Team that Speaks Your Language

Partner with The Lee Company and get much more than just a supplier of top-quality fluid control products. Find solutions, maximize productivity, and drive efficiency across your operations by using our literature, case studies, and videos. To learn more, check out these resources for diagnostics equipment manufacturers in every sector.