Close Menu
Lee Locations around the world
The Lee Company In the UK
The Lee Company in Germany
The Lee Company in France
The Lee Company In Italy
The Lee Company in Scandinavia
See Global Distributors and Agents
Back
Back
Back
Back
Back

Product Finder

in
Clear Filters
Clear Filters
102 Products Found
Clear Filters
558 Series Check Valve
This threadless, cartridge-style, one-way valve is designed for installation into metal manifolds and is 100% performance tested.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 5.47 mm
  • Lohm Rate: As low as 250 Lohms
  • Maximum Working Pressure: 280 Bar
  • Valve Seat Type: Metal to Metal
View Product
855 LC2 Series Pressure Relief Valve, Forward Flow
This cartridge, direct acting, safety pressure relief valve offers a high flow capacity for its size and is 100% performance tested.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 7.95 mm
  • Full Open Lohm Rate: 45 Lohms
  • Maximum Working Pressure: 280 bar
  • Relief Pressure Range: 100 to 500 kPa
View Product
5.5 mm Poppet Pressure Relief Valve
This threadless, cartridge, direct-acting safety pressure relief valve is designed for fast opening, low hysteresis, and high cracking pressures. It is 100% performance tested.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 5.46 mm
  • Full Open Lohm Rate: 650 Lohms
  • Maximum Working Pressure: 280 bar
  • Relief Pressure Range: 20 to 100 bar
View Product
12 mm Cartridge Safety Screen Filter
Our highest pressure rated woven wire mesh safety screen filter design. It's designed to be placed in a flat bottom hole and retained by a secondary means.
Key Product Facts
  • Mounting Configuration: Cartridge - Customer Retained
  • Lohm Rate: As low as 25 Lohms
  • Micron Rating: 40 to 300 microns
  • Part Diameter: 11.84 mm
  • Screenable Passageway Diameter: As large as 9.46 mm
View Product
16 mm Short Betaplug®
This aluminum tapered expansion plug is designed to seal fluid passages in high volume applications without the use of threads, O-rings, or sealants.
Key Product Facts
  • Plug Diameter: 16.08 mm
  • Max. Sealable Passageway Diameter: 15.39 mm
  • Rated Pressure: 35 bar
  • Plug Material: Aluminum
  • Housing Material: Aluminum, Cast Iron, Stainless Steel, or Steel
View Product
558 Series Vent Valve
This threadless, cartridge-style valve provides an innovative solution to removing trapped air within a pressurized system while minimizing hydraulic losses.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 5.47 mm
  • Lohm Rate: 1100 Lohms max.
  • Maximum Working Pressure: 28 MPa
View Product
5.5 mm Insert Air Bleed Orifice Restrictor
This precision micro flow restrictor is designed to bleed air from metal housings or manifolds. It is flow tested on gas and constructed of stainless steel.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 5.46 mm
  • Metered Flow Range: 100,000 - 180,000 Lohms
  • Test Fluid: Clean & Dry Nitrogen
  • Maximum Working Pressure: 21 MPa
View Product
8 mm DL Series Plug
This stainless steel expansion plug seals passages in aluminum housings. It is designed to enable the automation of installation and verification processes.
Key Product Facts
  • Plug Diameter: 7.95 mm
  • Max. Sealable Passageway Diameter: 7.20 mm
  • Rated Pressure: 69 bar
  • Plug Material: Stainless Steel
  • Housing Material: Aluminum
View Product
5.5 mm Insert Single-Orifice Restrictor for Liquids
This accurate flow restrictor is designed for installation into metal housings or manifolds. It is flow tested on water and made of stainless steel.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 5.46 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Distilled Water
  • Maximum Working Pressure: 21 MPa
View Product
5.5 mm Shuttle Valve
This threadless, cartridge-style selective shuttle is designed for logic function circuits and our smallest industrial design.
Key Product Facts
  • Type: Selective Shuttle Valve
  • Diameter: 5.47 mm
  • Lohm Rate: 75 Lohms max.
  • Maximum Working Pressure: 28 MPa
View Product
558 Series Restrictor Check Valve
This threadless, cartridge-style restrictor check valve is 5.5 mm and designed for installation into metal manifolds. It is 100% tested to ensure performance.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 5.47 mm
  • Metered Flow Range: 400 to 40,000 Lohms
  • Maximum Working Pressure: 280 bar
View Product
855 Series Flow Control Valve
This threadless, cartridge-style flow control valve is 8 mm and designed for installation into metal manifolds. It is 100% tested to ensure performance.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 7.95 mm
  • Metered Flow Range: 500 to 2000 Lohms
  • Maximum Working Pressure: 280 bar
View Product
Show More

No Results

No results match your search

Clear all Filters