Close Menu
Lee Locations around the world
The Lee Company In the UK
The Lee Company in Germany
The Lee Company in France
The Lee Company In Italy
The Lee Company in Scandinavia
See Global Distributors and Agents
Back
Back
Back
Back
Back

Product Finder

in
Clear Filters
Clear Filters
327 Products Found
Clear Filters
Solenoid Operated Pneumatic Isolation Valve
This valve draws upon the field-proven design elements of our ultra-compact piloting solenoid valve and is the ideal solution when a tight seal is needed over a wide range of pressures.
Key Product Facts
  • Lohm Rate: 650 Lohms max
  • Operating Pressure: 0 - 6500 psid
  • Leakage: 0 bubbles / minute on nitrogen
  • Weight: 0.14 lbs max
  • Pressure Assist to Open Design
View Product
Gas Rated Lee Jet® Single-Orifice Restrictor
This gas-tested, precision cleaned, high pressure, single-orifice flow restrictor is available with a ± 2% flow tolerance.
Key Product Facts
  • Type: Single-Orifice
  • Diameter: 0.187 inches
  • Metered Flow Range: 800 to 30,000 Lohms
  • Test Fluid: Nitrogen
  • Operating Pressures: Up to 5000 psi
View Product
Latching Solenoid Valve
This valve incorporates permanent magnets into the coil design to reduce power consumption, particularly when operating for extended “on” periods.
Key Product Facts
  • Lohm Rate: 2000 Lohms max
  • Operating Pressure: 3000 psid
  • Leakage: 1 cc / minute max
  • Weight: 0.20 lbs max
  • 2-Way and 3-Way Configurations Available
View Product
43 Series Visco Jet® Multi-Orifice Restrictor
This small, economical, and accurate multi-orifice flow restrictor is available calibrated to ± 5% or ± 10% tolerance.
Key Product Facts
  • Type: Multi-Orifice
  • Diameter: 0.43 inches
  • Metered Flow Range: 5000 to 2,200,000 Lohms
  • Test Fluid: Water
  • Operating Pressures: Up to 3000 psi
View Product
250 Zero-Leak Check Valve
This check valve provides zero leakage in the checked direction and is ideal for pneumatic and hydraulic applications with flow up to 1.7 GPM.
Key Product Facts
  • Poppet-Style Check Valves
  • Diameter: 0.25 inches
  • Lohm Rate: 180 Lohms max
  • Operating Pressures: Up to 3000 psi
  • Leakage: 0 bubbles / minute
View Product
187 Zero-Leak PRI® Pressure Relief Valve
This miniature, fast-acting safety relief valve is ideal for low pressure applications where leakage is critical.
Key Product Facts
  • Zero Leak Relief Valve
  • Diameter: 0.187 inches
  • Full Open Lohm Rate: 750 Lohms max
  • Nominal System Pressure: Up to 3000 psi
  • Cracking Pressure Range: 20 to 100 psi
View Product
Series 10 and 20 Safety Screen Filters, 230 Flange Mount, 316L
This wire mesh last chance filter is constructed of 316L stainless steel and offers hole sizes of 10 or 20 μm.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 200 or 300 Lohms
  • Micron Rating: 10 or 20 microns
  • Part Diameter: 0.230 inches
  • Screenable Passageway Diameter: 0.195 inches
View Product
187 Extreme Environment Check Valve
This zero-leak check valve is designed to withstand high temperatures and pressures for flow rates up to 0.7 GPM. NACE compliant materials are available.
Key Product Facts
  • Poppet-Style Check Valves
  • Diameter: 0.187 inches
  • Lohm Rate: 500 Lohms max
  • Operating Pressures: Up to 15,000 psi
  • Leakage: 0 bubbles / minute at 500-15,000 psid
View Product
HI-BAR® Safety Screen Filter, 330 Flange Mount, Brass
This last chance filter is laser drilled from a single piece of brass and comes with a flange mount.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 40 to 65 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.330 inches
  • Screenable Passageway Diameter: 0.26 inches
View Product
750 Hi-Q Check Valve
This check valve’s unique design maximizes the free flow in a very short, compact package and is ideal for applications with flow rates up to 40 GPM.
Key Product Facts
  • Poppet-Style Check Valves
  • Diameter: 0.75 inches
  • Lohm Rate: 7.5 Lohms max
  • Operating Pressures: Up to 5000 psi
  • Leakage: 1 drop / hour at 5000 psi
View Product
187 Restrictor Check Valve
This valve provides restricted flow in one direction and prevents flow in the other. Restriction rates are available from 1000 to 10,000 Lohms.
Key Product Facts
  • Ball-Style Restrictor Check Valves
  • Diameter: 0.187 inches
  • Metered Lohm Rates: 1000-10,000 Lohms
  • Operating Pressures: Up to 3000 psi
  • Leakage: 1 drop / hour at 3000 psi
View Product
HI-BAR® Inlet Safety Screen Filter, Flareless AS33514E04 to Port AS930-04
This laser drilled last chance filter comes in a Flareless AS33514E04 to Port AS930-04.
Key Product Facts
  • Mounting Configuration: Flareless Fitting
  • Lohm Rate: 30 to 55 Lohms
  • Micron Rating: 50 to 500 microns
View Product
Show More

No Results

No results match your search

Clear all Filters