Close Menu
Solenoid Valves

LHL Series Latching 3-Way Control Solenoid Valve

This small (7 mm), low power, 3/2, latching solenoid valve is ideal for directional control of gases or piloting samples in battery-operated, heat sensitive pneumatic applications. Thanks to its magnetically latching design, the valve will hold its flow state without power and only requires a momentary electrical pulse to switch state. With consistent, extremely reliable performance and low leakage, this valve offers high value across its cycle life. Each valve is customizable and 100% tested to ensure performance.

Key Product Facts
  • Latching Design:Holds latched state without power
  • Ultra-Low Power & Low Heat:5.5 mJ / switch
  • Lightweight:4.5 grams
  • Lohm Rate:1100 Lohms (Cv = 0.018)
  • Operating Pressure:Vacuum – 45 psig, 15 psid

Product Information

General Specifications
Characteristic Specification
Operating Pressure Vac - 45 psig; 15 psid Max
Leakage < 50 SµLPM
Cycle Life* 10 M Cycles Min
Recommended Filtration 35 Microns or Finer
Response Time** 10 - 30 ms Max
Operating Temperature 40°F to 120°F (4°C to 40°C)
Max Internal Coil Temperature*** 225°F (107°C)
Storage Conditions Temperature: -40°F to 175°F (-40°C to 80°C)
Relative Humidity: 85% Max, Non-Condensing
Weight < 4.5 grams
Internal Volume Plug-In: 40 µl
Face Mount: 72 µl
Ported: 77 µl
Unless otherwise indicated, listed specifications are based on 15 psi air, 70°F.
*Cycle life is dependent on system conditions and may vary by application.
**Response times are application dependent.
***To ensure solenoid coil temperatures remain within specification, duty cycle limitations may be required. Contact The Lee Company for recommendations specific to your application.
WETTED MATERIALS
Component Material
Housing PBT
Seal Silicone or FKM
Plunger Head* PPS or PPA
Armature & Plunger Stop 430 Stainless Steel or FeCr Alloy
Spring 316 Stainless Steel
Epoxy is also a wetted material on all LHL Series valves.
The O-rings on all plug-in valves are FKM.
*PPS for Valves With a Silicone Seal, PPA for FKM Valves
Flow Curve
Cross Section Views
Dimensional Views
Mounting Details

Part Numbers & Specifications

This table below contains the part numbers and technical specifications for this product. If you have specific questions, need a quote, or would like to request a handbook or drawing, click the red request button in the column on the far right.

Part Numbers & Specifications
Filter Part Numbers
CONFIGURATION
VOLTAGE* (Vdc)
SEAL MATERIAL
PART NUMBER
CONFIGURATION
VOLTAGE* (Vdc)
LOHM RATE** (Cv) OPERATING PRESSURE:
SUPPLY (psig)
OPERATING PRESSURE:
MAX DIFFERENTIAL*** (psid)
POWER CONSUMPTION****
(mJ/Switch)
SEAL MATERIAL
PLUNGER HEAD
MATERIAL
ARMATURE & PLUNGER
STOP MATERIAL
Request Information
LHLA0511111H Plug In 5 1100 Lohms (0.018) Vacuum - 45 15 5.5 Silicone PPS 430 Stainless Steel Request
LHLA1211111H Plug In 12 1100 Lohms (0.018) Vacuum - 45 15 5.5 Silicone PPS 430 Stainless Steel Request
LHLA0511211H Plug In 5 1100 Lohms (0.018) Vacuum - 45 15 5.5 FKM PPA 430 Stainless Steel Request
LHLA1211211H Plug In 12 1100 Lohms (0.018) Vacuum - 45 15 5.5 FKM PPA 430 Stainless Steel Request
LHLA0511355D Plug In 5 550 Lohms (0.036) Vacuum - 45 15 28 Silicone PPS FeCr Alloy Request
LHLA1211355D Plug In 12 550 Lohms (0.036) Vacuum - 45 15 35 Silicone PPS FeCr Alloy Request
LHLA0521111H Face Mount 5 1100 Lohms (0.018) Vacuum - 45 15 5.5 Silicone PPS 430 Stainless Steel Request
LHLA1221111H Face Mount 12 1100 Lohms (0.018) Vacuum - 45 15 5.5 Silicone PPS 430 Stainless Steel Request
LHLA0521211H Face Mount 5 1100 Lohms (0.018) Vacuum - 45 15 5.5 FKM PPA 430 Stainless Steel Request
LHLA1221211H Face Mount 12 1100 Lohms (0.018) Vacuum - 45 15 5.5 FKM PPA 430 Stainless Steel Request
LHLA0521380D Face Mount 5 800 Lohms (0.025) Vacuum - 45 15 28 Silicone PPS FeCr Alloy Request
LHLA1221380D Face Mount 12 800 Lohms (0.025) Vacuum - 45 15 35 Silicone PPS FeCr Alloy Request
LHLA0531111H Ported 5 1100 Lohms (0.018) Vacuum - 45 15 5.5 Silicone PPS 430 Stainless Steel Request
LHLA1231111H Ported 12 1100 Lohms (0.018) Vacuum - 45 15 5.5 Silicone PPS 430 Stainless Steel Request
LHLA0531211H Ported 5 1100 Lohms (0.018) Vacuum - 45 15 5.5 FKM PPA 430 Stainless Steel Request
LHLA1231211H Ported 12 1100 Lohms (0.018) Vacuum - 45 15 5.5 FKM PPA 430 Stainless Steel Request
LHLA0531380D Ported 5 800 Lohms (0.025) Vacuum - 45 15 28 Silicone PPS FeCr Alloy Request
LHLA1231380D Ported 12 800 Lohms (0.025) Vacuum - 45 15 35 Silicone PPS FeCr Alloy Request
Clear Filters
Unless otherwise indicated, listed specifications are on air at 70°F (21°C).
*The valve will switch to and remain in the state indicated when a 10-30 ms electrical pulse is applied at the rated voltage and polarity.
**Reference the flow curve under the product information tab for flow rate at varying pressures.
***Maximum differential across ports. Our standard 3-port valves are designed for unidirectional flow, where the highest absolute pressure should be maintained at the common port (C).
****Energy consumed per switch when actuated for 10 ms at rated voltage.

Installation & Accessories

Accessories View
Replacement Parts & Accessories
CONFIGURATION PART NUMBER DESCRIPTION
Plug In LHDX0526050A Boss Plug (POM with FKM O-rings)
Plug In LHWX0218030A Replacement O-ring (FKM)
Plug In LLWX0307140A Retention Bracket, 1x
Plug In LLWX0307130A Retention Bracket, 3x
Plug In LLWX0307120A Retention Bracket, 8x
Plug In LHWX0503010A Screw, Socket Head Cap, 0.086" #2-56 x 0.250" Stainless Steel
Plug In LFMX0503800A* Manifold, 1x, Individual Outlet Ports, PMMA
Plug In LFMX0522450B* Manifold, 1x, Individual Outlet Ports, Aluminum
Plug In LFMX0510413B* Manifold, 3x, Individual Ports, Aluminum
Plug In LFMX0510418B* Manifold, 8x, Individual Ports, Aluminum
Plug In LFMX0510423B*, ** Manifold, 3x, Common Port Header, Individual NC & NO Ports, Aluminum
Plug In LFMX0510428B*, ** Manifold, 8x, Common Port Header, Individual NC & NO Ports, Aluminum
Plug In LFMX0510433B*, ** Manifold, 3x, NC & NO Headers, Individual Common Ports, Aluminum
Plug In LFMX0510438B*, ** Manifold, 8x, NC & NO Headers, Individual Common Ports, Aluminum
Face Mount LHWX0218000A Gasket (SI)
Face Mount LHWX0218010A Gasket (FKM)
Face Mount LHDX0307130A Mounting Screw Support, 2x, PBT
Face Mount LHDX0307140A Mounting Screw Support, 1x, PBT
Face Mount LHWX0503100A Screw, Socket Head Cap, 0.086" #2-56 x 0.375" Stainless Steel
Face Mount LHWX0213420A1 Screw, Socket Head Cap, 0.086" #2-56 x 0.438" (7/16") Stainless Steel
Face Mount LFMX0507200A* Manifold, 1x, Individual Outlet Ports, Aluminum
Face Mount LFMX0510513B* Manifold, 3x, Individual Ports, Aluminum
Face Mount LFMX0510518B* Manifold, 8x, Individual Ports, Aluminum
Face Mount LFMX0510523B*, ** Manifold, 3x, Common Port Header, Individual NC & NO Ports, Aluminum
Face Mount LFMX0510528B*, ** Manifold, 8x, Common Port Header, Individual NC & NO Ports, Aluminum
Face Mount LFMX0510533B*, ** Manifold, 3x, NC & NO Headers, Individual Common Ports, Aluminum
Face Mount LFMX0510538B*, ** Manifold, 8x, NC & NO Headers, Individual Common Ports, Aluminum
Ported LHWX0320090A Port Plug
Ported LHWX0503100A Screw, Socket Head Cap, 0.086" #2-56 x 0.375" Stainless Steel
Ported LLWX0360120A Tubing, 0.066" ID, 1/8"OD, 6' Long, Polyurethane
Universal All Styles LHWX0605450A Lead Wire Connector, 6" Long
Several standard manifolds are available to ease prototype setup. They are available in mounting denominations of single valve (1x), three valves (3x) and eight valves (8x). Combine these denominations or plug unused ports to configure the setup for your specific application. Manifold part numbers include the manifold and secondary retention bracket only. All solenoid valves are sold separately. Alternate materials and customized manifold designs are available upon request.
**For use only with valves rated to 1100 Lohms or higher.
Get in touch

Questions?

From plugs to solenoid valves, there’s a vast array of products that The Lee Company can offer. If you’d like to discuss the best solution for your specific application or to learn more about our capabilities, use-cases, or quality standards, contact your local Lee sales engineer.