This check valve has been qualified at cryogenic temperatures and showed leakage results under 10 sccm of helium at -320 degrees Fahrenheit.

This gas-tested, precision cleaned, high pressure, multi-orifice flow restrictor is available with a ± 5% flow tolerance.

This valve draws upon the field-proven design elements of our ultra-compact piloting solenoid valve and is the ideal solution when a tight seal is needed over a wide range of pressures.

This member of our classic Lee Plug family is ideal for installation into aluminum manifolds. Sizes range from 0.093 to 0.656 inches.

This last chance filter is laser drilled from a single piece of titanium and comes with a flange mount.

This valve features an economical ball-style design and is ideal for applications with flow rates up to 1.2 GPM.

This shuttle valve incorporates a polyimide valve seat to create a leak tight seal when tested on nitrogen. It features a detent mechanism that can latch the poppet at either of the inlet ports.

This small, economical, and accurate single-orifice flow restrictor is available in two standard tolerances, +/-2% and +/-5%.

This piloting design utilizes a redundant electrical solenoid coil for added safety in exchange for a slight increase in envelope diameter and weight.

This miniature, fast-acting safety relief valve is ideal for systems up to 3000 psi and is available with a wide variety of cracking pressures.

This insert-retained, directional flow control valve is ideal for high pressures and provides metered flow in one direction and free flow in the other direction. Integral safety screens are included for added protection against contaminants.

Forward Screened Lubrication Jets are offered with a ± 10% tolerance and are available in metered flow ranges from 500 to 7500 Lohms.