Close Menu
Lee Locations around the world
The Lee Company In the UK
The Lee Company in Germany
The Lee Company in France
The Lee Company In Italy
The Lee Company in Scandinavia
See Global Distributors and Agents
Back
Back
Back
Back
Back

Product Finder

in
Clear Filters
Clear Filters
37 Products Found
Clear Filters
5.5 mm Insert Air Bleed Orifice Restrictor
This precision micro flow restrictor is designed to bleed air from metal housings or manifolds. It is flow tested on gas and constructed of stainless steel.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 5.46 mm
  • Metered Flow Range: 100,000 - 180,000 Lohms
  • Test Fluid: Clean & Dry Nitrogen
  • Maximum Working Pressure: 21 MPa
View Product
2.5 mm Brass Press-In Single-Orifice Restrictor for Gases
This accurate flow restrictor is designed for installation into plastic housings and fittings. It is flow tested on gas and constructed of brass.
Key Product Facts
  • Mounting Configuration: Press-In - Into Plastic
  • Diameter: 2.54 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Clean & Dry Nitrogen
  • Maximum Working Pressure: Dependent on Housing Material
View Product
2.5 mm 316 Stainless Steel Press-In Single-Orifice Restrictor for Gases
This accurate flow restrictor is designed for installation into plastic housings and fittings. It is flow tested on gas and constructed of 316L stainless steel.
Key Product Facts
  • Mounting Configuration: Press-In - Into Plastic
  • Diameter: 2.54 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Clean & Dry Nitrogen
  • Maximum Working Pressure: Dependent on Housing Material
View Product
2.5 mm 303 Stainless Steel Press-In Single-Orifice Restrictor for Gases
This accurate flow restrictor is designed for installation into plastic housings and fittings. It is flow tested on gas and constructed of 303 stainless steel.
Key Product Facts
  • Mounting Configuration: Press-In - Into Plastic
  • Diameter: 2.54 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Clean & Dry Nitrogen
  • Maximum Working Pressure: Dependent on Housing Material
View Product
2.5 mm 316 Stainless Steel Press-In Single-Orifice Restrictor for Liquids
This accurate flow restrictor is designed for installation into plastic housings and fittings. It is flow tested on water and constructed of 316L stainless steel.
Key Product Facts
  • Mounting Configuration: Press-In - Into Plastic
  • Diameter: 2.54 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Distilled Water
  • Maximum Working Pressure: Dependent on Housing Material
View Product
2.5 mm 303 Stainless Steel Press-In Single-Orifice Restrictor for Liquids
This accurate flow restrictor is designed for installation into plastic housings and fittings. It is flow tested on water and constructed of 303 stainless steel.
Key Product Facts
  • Mounting Configuration: Press-In - Into Plastic
  • Diameter: 2.54 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Distilled Water
  • Maximum Working Pressure: Dependent on Housing Material
View Product
8 mm Insert Single-Orifice Restrictor for Gases
This accurate flow restrictor is designed for installation into metal housings or manifolds. It is flow tested on gas and constructed of stainless steel.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 7.95 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Clean & Dry Nitrogen
  • Maximum Working Pressure: 21 MPa
View Product
2.5 mm Insert Single-Orifice Restrictor for Gases
This accurate flow restrictor is designed for installation into metal housings or manifolds. It is flow tested on gas and constructed of stainless steel.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 2.54 mm
  • Metered Flow Range: 1200 - 45,000 Lohms
  • Test Fluid: Clean & Dry Nitrogen
  • Maximum Working Pressure: 21 MPa (In Aluminum)
View Product
5.5 mm Insert Single-Orifice Restrictor for Gases
This accurate flow restrictor is designed for installation into metal housings or manifolds. It is flow tested on gas and constructed of stainless steel.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 5.46 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Clean & Dry Nitrogen
  • Maximum Working Pressure: 21 MPa
View Product
8 mm Insert Single-Orifice Restrictor for Liquids
This accurate flow restrictor is designed for installation into metal housings or manifolds. It is flow tested on water and made of stainless steel.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 7.95 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Distilled Water
  • Maximum Working Pressure: 21 MPa
View Product
5.5 mm Insert Single-Orifice Restrictor for Liquids
This accurate flow restrictor is designed for installation into metal housings or manifolds. It is flow tested on water and made of stainless steel.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 5.46 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Distilled Water
  • Maximum Working Pressure: 21 MPa
View Product
2.5 mm Insert Single-Orifice Restrictor for Liquids
This accurate flow restrictor is designed for installation into metal housings or manifolds. It is flow tested on water and constructed of stainless steel.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 2.54 mm
  • Metered Flow Range: 1200 - 45,000 Lohms
  • Test Fluid: Distilled Water
  • Maximum Working Pressure: 21 MPa (In Aluminum)
View Product
Show More

No Results

No results match your search

Clear all Filters