Close Menu
Lee Locations around the world
The Lee Company In the UK
The Lee Company in Germany
The Lee Company in France
The Lee Company In Italy
The Lee Company in Scandinavia
See Global Distributors and Agents
Back
Back
Back
Back
Back

Product Finder

in
Clear Filters
Clear Filters
554 Products Found
Clear Filters
Cryogenic Check Valve
This check valve has been qualified at cryogenic temperatures and showed leakage results under 10 sccm of helium at -320 degrees Fahrenheit.
Key Product Facts
  • Operating Temperature: -320 to +275 degrees F
  • Lohm Rate: 85 Lohms
  • Operating Pressures: Up to 5000 psi
  • Inlet Fitting End: AS4395E04
  • Outlet Fitting End: AS4395E06
View Product
Gas Rated Visco Jet® Multi-Orifice Restrictor
This gas-tested, precision cleaned, high pressure, multi-orifice flow restrictor is available with a ± 5% flow tolerance.
Key Product Facts
  • Type: Multi-Orifice
  • Diameter: 0.187 inches
  • Metered Flow Range: 3520 to 313,000 Lohms
  • Test Fluid: Nitrogen
  • Operating Pressures: Up to 5000 psi
View Product
Flow Control Solenoid Valve
This small (7mm) valve toggles between two distinct flow restrictions: a high-flow state and a low-flow state to actively modulate the flow of liquids.
Key Product Facts
  • Low Power: As low as 200 mW (hold power)
  • Typical Lohm Rate in high-flow state: 90 Lohms
  • Lohm Rate in low-flow state: 500 to 3000 Lohms
  • Operating Pressure: 45 psig
View Product
Flow Regulating Valve
Flow regulating valve designed specifically for sled-level direct-to-chip liquid cooling applications in the data center. 100% functionally tested, and compatible with both single phase and two-phase liquids.
Key Product Facts
  • Mounting Configuration: DL Series for installation into soft metals; Press-In for installation into plastic, hose mount
  • Diameter: 5.5 mm to 12 mm
  • Regulated Flow Rate: 0.2 - 4 LPM, or higher
  • Maximum Working Pressure: 69 bar in Aluminum
View Product
200 Series Hi Output Pump
This radial piston pump offers pressures up to 100 psid and higher flows of up to 45 GPH. A motor, connector, and integral control electronics are included.
Key Product Facts
  • Flow: 45 GPH
  • Pressure: 100 psid
  • Temperature: -67°F to 185°F
  • Operational Feedback: Pump speed, motor current, and fault monitoring
  • Variable Speed Control
View Product
Pneumatic Latching Solenoid Valve
This valve draws upon the field-proven design of our pneumatic latching solenoid valve and is the ideal solution when low power and tight seal is needed.
Key Product Facts
  • Lohm Rate: 650 Lohms max
  • Operating Pressure: 0 - 1000 psid
  • Leakage: 0 bubbles / minute on nitrogen
  • Weight: 0.20 lbs
  • Pressure Assist to Open Design
View Product
Latching Mechanical Valve
This latching one-way mechanical valve is made with stainless steel materials, tungsten carbide balls, and an elastomeric seal for tight leakage. It is 100% functionally tested.
Key Product Facts
  • Detented Check Valves
  • Diameter: 0.67 or 0.85 inches
  • Lohm Rate: 65 & 240 Lohms
  • Latching Pressures: Up to 120 psid
  • Leakage: 1x10^-5 SCCS max on GHe
View Product
250 MP35N Dual Sealing A.F.O.® Plug
This NACE-compliant, thread-retained plug designed to apply axial force only on the installation hole while incorporating an O-ring for venting or charging.
Key Product Facts
  • Plug Diameter: 0.250 inches
  • Max. Sealable Passageway Diameter: 0.130 inches
  • Proof Pressure: 22,500 psi
  • Plug Material: MP35N
  • Housing Material: Inconel, Monel, MP35N, or Titianium
View Product
250 Stainless Steel Dual Sealing A.F.O.® Plug
This thread-retained plug is designed to apply axial force only on the installation hole. It incorporates an O-ring for venting or charging.
Key Product Facts
  • Plug Diameter: 0.250 inches
  • Max. Sealable Passageway Diameter: 0.130 inches
  • Proof Pressure: 20,000 psi
  • Plug Material: Stainless Steel
  • Housing Material: Aluminum, or Stainless Steel
View Product
Dual Insert Adapter
This Dual Insert Adapter makes using two Lee inserts of the same diameter, in the same hole easy and reliable.
Key Product Facts
  • Diameters: 0.187 - 0.500
  • Material: 440C Stainless Steel
View Product
12 mm BR Series Safety Screen Filter
Our highest pressure rated woven wire mesh safety screen features a locking end designed for secure retention in flat-bottom holes in metal housings.
Key Product Facts
  • Mounting Configuration: BR Series - Into Metal
  • Lohm Rate: As low as 22 Lohms
  • Micron Rating: 40 to 170 microns
  • Part Diameter: 11.93 mm
  • Screenable Passageway Diameter: As large as 9.60 mm
View Product
343 Aluminum Lubrication Jet
This Aluminum lubrication jet generates a straight, well-defined stream of fluid with a ± 15% tolerance and are available in metered flow ranges from 450 to 7900 Lohms.
Key Product Facts
  • Type: Lubrication Nozzle
  • Metered Flow Range: 200 to 7900 Lohms
  • Diameter: 0.343 inches
  • Screened: No
View Product
Show More

No Results

No results match your search

Clear all Filters