Close Menu
Lee Locations around the world
The Lee Company In the UK
The Lee Company in Germany
The Lee Company in France
The Lee Company In Italy
The Lee Company in Scandinavia
See Global Distributors and Agents
Back
Back
Back
Back
Back

Product Finder

in
Clear Filters
Clear Filters
13 Products Found
Clear Filters
Dual Insert Adapter
This Dual Insert Adapter makes using two Lee inserts of the same diameter, in the same hole easy and reliable.
Key Product Facts
  • Diameters: 0.187 - 0.500
  • Material: 440C Stainless Steel
View Product
Pump Head Syringe T-Connector
This product contains two 2.5 mm Press-In Check Valves in a Luer T-Connector fitting.
Key Product Facts
  • Mounting Configuration: Luer Tee Fitting
  • Full Open Lohm Rate: 750 Lohms
  • Check Valves Cracking Pressures: 4 ± 3 kPa
  • Test Air: Clean & Dry Nitrogen
  • Maximum Working Pressure: Dependent on Housing Material
View Product
2.5 mm Pressure Relief Valve and Check Valve in Luer Tee Fitting
This product contains a 2.5 mm pressure relief valve and 2.5 mm check valve in a Luer Tee fitting.
Key Product Facts
  • Mounting Configuration: Luer Tee Fitting
  • Full Open Lohm Rate: 750 Lohms
  • Relief Pressure Range: 100 to 300 kPa
  • Check Valve Cracking Pressure: 4 ± 3 kPa
  • Maximum Working Pressure: Dependent on Housing Material
View Product
High Lohm Orifice In 1/8 Inch BARB To 3/32 Inch BARB Union
This accurate, high Lohm flow rate restrictor is installed into a 1/8" to 3/32" barb-to-barb union. It is flow tested on nitrogen gas and constructed of stainless steel.
Key Product Facts
  • Mounting Configuration: Barb Union
  • Metered Flow Range: 60,000 - 5,000,000 Lohms
  • Metered Flow Tolerance: ±10%
  • Test Fluid: Clean & Dry Nitrogen
  • Maximum Working Pressure: Dependent on Housing Material
View Product
Lee Burst-Sert™ Rupture Disc
This single-use isolation device is designed to seal a passageway or volume until the rated burst pressure is exceeded.
Key Product Facts
  • Rupture Disc
  • Diameters: 0.250 to 0.531 inches
  • Pressure Range: 3000 to 15,000 psi
  • Tolerance: ± 10% of rated burst pressure
  • Operating Temperature: up to 392°F (200°C)
View Product
281 PRI®/Check Valve
This valve combines the function of a pressure relief valve in parallel with that of a check valve in one easy-to-install insert.
Key Product Facts
  • PRI/Check
  • Diameter: 0.281 inches
  • Relief Flow Lohm Rate: 220 or 1500
  • Free Flow Lohm Rate: 300 or 550 Lohms
  • Relief Cracking Pressure Range: 625 to 6600 psid
View Product
375 PRI®/Check Valve
This valve combines the function of a pressure relief valve in parallel with that of a check valve in one easy-to-install insert.
Key Product Facts
  • PRI/Check
  • Diameter: 0.375 inches
  • Relief Flow Lohm Rate: 400 Lohms max.
  • Free Flow Lohm Rate: 220 Lohms max.
  • Relief Cracking Pressure Range: 3000 to 5400 psid
View Product
Kipster Peak Pressure Recorder
This miniature peak pressure recorder offers unique design opportunities where other expensive and bulky options are inappropriate.
Key Product Facts
  • Peak Pressure Recorder
  • Diameter: 0.195 inches
  • Pressure Range: 4000 to 30,000 psi
  • Accuracy: 3% of full scale
View Product
Tubing & Components
Miniature tubing and components for fluidic connections
Key Product Facts
  • Compatible with Many of Lee's Miniature Solenoid Valves, Dispense Pumps, and Nozzles
  • Compact Size
  • Wide Variety of Mounting Sizes and Options Available
View Product
Orifice In Male to Female Luer For Gases
This highly accurate flow restrictor is intended for gases and pre-installed in a male to female Luer fitting. It is flow tested on nitrogen and constructed of stainless steel.
Key Product Facts
  • Mounting Configuration: Luer Fitting
  • Metered Flow Range: 5000 - 45,000 Lohms
  • Metered Flow Tolerance: ±5%
  • Test Fluid: Clean & Dry Nitrogen
  • Maximum Working Pressure: Dependent on Housing Material
View Product
Orifice In Male to Female Luer For Liquids
This highly accurate flow restrictor is intended for liquids and pre-installed in a male to female Luer fitting. It is flow tested on nitrogen and constructed of stainless steel.
Key Product Facts
  • Mounting Configuration: Luer Fitting
  • Metered Flow Range: 5000 - 45,000 Lohms
  • Metered Flow Tolerance: ±5%
  • Test Fluid: Distilled Water
  • Maximum Working Pressure: Dependent on Housing Material
View Product
2.5 mm Pressure Relief Valve in a Luer Tee Fitting
This direct-acting cartridge safety pressure relief valve is installed into a Luer Tee fitting and is 100% functionally tested to ensure performance.
Key Product Facts
  • Mounting Configuration: Luer Tee Fitting
  • Full Open Lohm Rate: 750 Lohms
  • Relief Pressure Range: 100 to 300 kPa
  • Relief Pressure Tolerance: ± 15%
  • Maximum Working Pressure: Dependent on Housing Material
View Product
Show More

No Results

No results match your search

Clear all Filters